Safety Data Sheets (SDS)

Ice Slicer® Granular Ice Melt
1/30/2015
Page 2 of 5 - Ice Slicer® is a registered trademark of Redmond, Incorporated.
4. FIRST AID MEASURES
Eye: Flush victim's eyes with water while holding the eyelids apart. Get medical attention if irritation occurs
and persists.
Skin: Wash skin thoroughly with soap and water. Get medical attention if irritation develops. Remove and
launder clothing before reuse.
Ingestion: Do not induce vomiting unless directed to do so by a medical professional. Rinse mouth with water
and give one glass of water to drink. Do not give liquids to an unconscious person. Get medical attention if
symptoms develop.
Inhalation: If symptoms occur, remove victim to fresh air. If breathing is difficult or irritation persists, get
medical attention.
Most important Symptoms: May cause slight eye irritation. Dust may cause slight respiratory tract irritation.
Indication of immediate medical attention/special treatment: Immediate medical attention is not required.
5. FIRE FIGHTING MEASURES
Suitable (and Unsuitable) Extinguishing Media: Use media appropriate for surrounding fire.
Specific hazards arising from the chemical: Thermal decomposition may yield hydrogen chloride, halogenated
compounds, and chlorine gas.
Special Protective Equipment and Precautions for Fire-Fighting Instructions: Firefighters should wear positive
pressure self-contained breathing apparatus and full protective clothing. Aqueous solutions may cause
surfaces to be extremely slippery and cause a slip hazard.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment, and Emergency Procedures: Wear appropriate protective
clothing as described in Section 8. Wash thoroughly after handling.
Methods and Materials for Containment and Cleaning Up: Sweep up material and collect in a suitable
container for disposal. Flush spill area with water. Report releases as required by local, state, and federal
authorities.
7. HANDLING AND STORAGE
Precautions for Safe Handling: Avoid contact with the eyes, skin, and clothing. Avoid breathing dusts. Wear
protective clothing and equipment as described in Section 8. Wash thoroughly with soap and water after
handling. Keep containers closed when not in use.
Conditions for Safe Storage, Including Any Incompatibilities: Store in a cool, dry, well-ventilated area away
from incompatible materials. Product may be corrosive to some metals.