Spec Sheet

Rev: 02/20
Part: C009
11100 E. 45th Avenue • Denver, CO 80239 • Phone: 1. 866. PURE. ICE • Fax: [phone] • www.iceomatic.com
Ice. Pure and Simple
CIM/CUBEICEMAKER
Notes:
Number of Wires: 3 (including ground)
Approx. Shipping Weight lbs (kg): CIMA230 (105) • CIMR215 (98) • CIMA230 (105) • CIMR215 (98)
Refrigerant Type: CIMA = R404A
Operating Requirements
Specifications
MAXIMUM
60 Hz 50Hz
AmbientTemp. Range Air
50˚F (10˚C)
100˚F (38˚C) 110˚F (43˚C)
WaterTemp.
40˚F (4.4˚C)
Water Pressure
20 PSIG (1.4 BAR) 80 PSIG (5.5 BAR)
MINIMUM
Model Number Cond. Unit
Half-Cube
Ice Production
per 24hrs
Water Usage
gallons per 100 lbs of Ice
90°F air/70°F water
kWH Used
per 100 lbs of
ice @ 90°F air/
70°F water
Voltage
Characteristics
Min.
Circuit
Ampacity
Min/Max
Circuit
Breaker
Approx.
BTUs
per hour
70°F air/
50°F water
lbs (kg)
90°F air/
70°F water
lbs (kg)
Potable Condenser
CIMA Air
932 (423) 762 (346)
19.0
N /A
5.1
208-230/60/1
12.2
20/25
18,200
CIMR**
Remote 968 (439) 855 (388) 5.0 12.8
CIMW
Water 968 (439) 896 (406) 140.0 4.1 11.8
CIMA
Air 937 (425) 824 (374)
18.0 N /A
5.2
220-240/50/1
13.5
19,300
CIMR** Remote 1035 (469) 927 (420) 4.6 14.1
ELEVATIONSERIESCUBEICEMAKER
CIM/
POTABLE
WATER OUT
POTABLE
WATER IN
1.6"
(41mm) (2x)
ELECTRICAL
CONNECTIONS
17.0"
(432mm)
18.2
"
(463mm)
6.5"
(166mm)
2.1"
(53mm)
1.0"
(25mm)
1.1"
(28mm) (2x)
3.0"
(76mm)
LIQUID LINE
4.0"
(102mm)
3.2"
(80mm)
3.0"
(76mm)
1.0"
(25mm)
.3"
(4x) (8mm)
1.8"
(45mm)
5.7"
(144mm)
DISCHARGE LINE
B.
A.
D.
C.
E.
G.
F.
Remote Cooled
1.6"
(41mm) (2x)
POTABLE
WATER IN
POTABLE
WATER OUT
ELECTRICAL
CONNECTIONS
18.2
"
(463mm)
17.0"
(432mm)
6.5"
(166mm)
2.1"
(53mm)
1.0"
(25mm)
1.1"
(28mm) (2x)
3.0"
(76mm)
3.0"
(76mm)
1.0"
(25mm)
.3"
(4x) (8mm)
B.
A.
D.
C.
Air Cooled
Air Cooled
A. Ice maker potable water in, ⁄"FPT.
B. Ice maker water out, ⁄"FPT.
C. Hole for electricalconnections, ⁄".
D. Electrical connection junctionbox, ⁄".
Please note: air-cooled units require 6" (152 mm)
clearance for air intake and exhaust.
Remote Cooled
A. Ice maker potable water in, ⁄"FPT.
B. Ice maker water out, ⁄"FPT.
C. Hole for electricalconnections, ⁄".
D. Electrical connection junction box, ⁄" (remote).
E. Condenser water in, ⁄"FPT (water only). Discharge line,
⁄" male quick connect coupling for precharged line set (remote only).
F. Condenser water out, ⁄"FPT (water only).
G. Liquid line, ⁄" male quick connect for precharged line set (remote only).
Dual Exhaust for Installation Flexibility
Dimensions
W x D x H (in.) 22.25 x 24.25 x 26.9
W x D x H (mm) 565 x 616 x 683
ALLMODELS
* Daily ice production based on half cube configuration. When installing a CIM on a drink dispenser, the KCUBEDISPB MUST be used.
** Remote models CIMR & CIMRrequire the RCA-2061 remote condenser with optional grill guard kit.