Spec Sheet
Rev: 02/20
Part: C004
11100 E. 45th Avenue • Denver, CO 80239 • Phone: 1. 866. PURE. ICE • Fax: 303. 371. 6296 • www.iceomatic.com
Ice. Pure and Simple
CIM/CUBEICEMAKER
Water Cooled/Remote Cooled
A. Ice maker potable water in, ⁄"FPT.
B. Ice maker water out, ⁄"FPT.
C. Hole for electricalconnections, ⁄".
D. Electrical connection junction box, ⁄" (remote).
E. Condenser water in, ⁄"FPT (water only).
Discharge line, ⁄" male quick connect coupling
for precharged line set (remote only).
F. Condenser water out, ⁄"FPT (water only).
G. Liquid line, ⁄" male quick connect for
precharged line set (remote only).
Notes:
Number of Wires: 3 (including ground)
Approx. Shipping Weight lbs (kg): CIMA139 (63.0) • CIMR160 (72.5) • CIMW160 (72.5) • CIMA160 (72.5)
Refrigerant Type: CIMA = R404A
Operating Requirements
Specifications
MAXIMUM
60 Hz 50Hz
AmbientTemp. Range Air
50˚F (10˚C)
100˚F (38˚C) 110˚F (43˚C)
WaterTemp.
40˚F (4.4˚C)
Water Pressure
20 PSIG (1.4 BAR) 80 PSIG (5.5 BAR)
MINIMUM
Model Number Cond. Unit
Half-Cube
Ice Production
per 24hrs
Water Usage
gallons per 100 lbs of Ice
90°F air/70°F water
kWH Used
per 100 lbs of
ice @ 90°F air/
70°F water
Voltage
Characteristics
Min.
Circuit
Ampacity
Fuse
Size
Approx.
BTUs
per hour
70°F air/
50°F water
lbs (kg)
90°F air/
70°F water
lbs (kg)
Potable Condenser
CIMA Air
600 (272) 455 (206) 18.6 -
5.63
208-230/60/1
9.2
15
8,600
CIMR** Remote 615 (279) 535 (243) 19.0 - 5.29 10.0
CIMW Water 620 (281) 535 (243) 19.2 180.0 4.27 9.0
CIMA Air 585 (265) 450 (204) 20.0 - 5.72 220-240/50/1 8.1 16
ELEVATIONSERIESCUBEICEMAKER
CIM/
Water Cooled/Remote Cooled
.33"
(8.45mm)
(4X)
5.0"
(127mm)
7.0" (177.8mm)
5.0" (127mm)
5.11" (129.72mm)
5.63" (142.97mm)
(2X)
7.0"
(177.8mm)
9.67"
(245.49mm)
17.00"
(431.72mm)
18.25"
(463.47mm)
2.08"
(52.71mm)
B.
C.
D.
A.
18.25"
(463.47mm)
7.0" (177.8mm)
5.0" (127mm)
5.11" (129.72mm)
17.00"
(431.72mm)
9.67"
(245.49mm)
2.08"
(52.71mm)
.33"
(8.45mm)
(4X)
5.0" (127mm)
7.12" (180.90mm)
7.0" (177.8mm)
7.99" (202.89mm)
5.67" (143.89mm)
1.79" (45.47mm)
5.63" (142.97mm)
(2X)
B.
C.
D.
A.
F.
E.
G.
Air Cooled
Dual Exhaust for Installation Flexibility
Air Cooled
A. Ice maker potable water in, ⁄"FPT.
B. Ice maker water out, ⁄"FPT.
C. Hole for electricalconnections, ⁄".
D. Electrical connection junctionbox, ⁄".
Please note: air-cooled units require 6" (152 mm) clearance for air
intake and exhaust.
** Remote model CIMR requires the RCA-1061 remote condenser with optional grill guard kit.
Dimensions
W x D x H (in.) 30.25 x 24.25 x 21.25
W x D x H (mm) 768 x 616 x 540
ALLMODELS
* Daily ice production based on half cube configuration. When installing a CIM on a drink dispenser, the KCUBEDISPB MUST be used.