Service Manual

ELEVATION SERIES CIM CUBERS SEQUENCE OF OPERATIONS
10
CONTROL BOARD - FREEZE CYCLE
A quick press of the POWER button on the Push Pad or Board will start the Freeze cycle. The Water Inlet
Valve will be energized (R4 LED on Board illuminated) and water will begin flowing into the Sump. As the
water rises, the contacts in the Low Water Float will open (Switch LED off). The Water Inlet Valve will
remain energized until the High Water Float contacts open (Switch LED off). The Water inlet Valve will be
de-energized (R4 LED on Board off).
Note: Minimum Freeze Cycle - 5 minutes (from Compressor Start.)
Maximum Freeze Cycle - 1 hour.
BROWN
BLUE
VIOLET
BLACK
RED
TAN
PINK
YELLOW
= Illuminated LED
WHITE
WHITE
BLUE w/ WHITE
BLUE w/ RED
BLUE
12V DC Switches
Line Voltage
Components
R1 R2 R3 R4 R5 R6