Installation Instructions

888-ASK-4ICC csr@icc.com icc.com

INSTALLATION INSTRUCTIONS

Slide-Out Fiber Optic Rack Mount Enclosures

Optional: If splicing or grounding is required then install a splice tray or

grounding lug. Both are sold separately.

Step 1. Mount the enclosure to a 19” distribution rack with #12-24 rack screws.

Note: It is recommended to mount the enclosure above eye level.

Step 3. Install cable management spools and secure them using screw nuts.

Spools can be conﬁ gured and stacked in a variety of ways depending on your

preference. Next, install ﬁ ber optic adapter panels or MPO cassettes. Note:

MPO cassettes require more room, so the spools will have to be removed.

Step 2. Remove the front and rear covers.

Step 4. Follow proper ﬁ ber bend radius standard and route cable around

spools. Be sure to loop ﬁ bers into the tray, and add slack to allow the tray

to slide out.

We offer 3 sizes of enclosures. Mounting is similar for all of them.

Grounding lug Splice tray

3.56”

Adapter panel

MPO cassette

Cable management spool

3 panel 6 panel 12 panel

PAGE 1
Slide-Out Fiber Optic Rack Mount Enclosures I 3 panel N S T A 6 panel L L A T I O N I N S T R U C T I O N S 12 panel We offer 3 sizes of enclosures. Mounting is similar for all of them. Step 1. Mount the enclosure to a 19” distribution rack with #12-24 rack screws. Note: It is recommended to mount the enclosure above eye level. Cable management spool Adapter panel MPO cassette 3.56” Step 2. Remove the front and rear covers. Step 3.
PAGE 2
Slide-Out Fiber Optic Rack Mount Enclosures I N S T A L L A T I O N I N S T R U C T I O N S A ICFORE31RM ICFORE62RM ICFORET4RM 3 panel, 1 RMS* 6 panel, 2 RMS* 12 panel, 4 RMS* A Rack mount fiber optic enclosure 3 panel 6 panel 12 panel 1 pc. 1 pc. 1 pc. B Cable management spools 4 pcs. 4 pcs. 4 pcs. C Hook and loop ties 10 pcs. 10 pcs. 10 pcs. D #12-24 rack screws 4 pcs. 4 pcs. 8 pcs. E M5 x 0.8 screw nuts 4 pcs. 4 pcs. 4 pcs.