Operation Manual

Chapter 3 Settings
29
Settings
The settings of your device can be found and adjusted in the
Settings menu. To go to the Settings menu:
 Press the Home button to open the Home screen
 Press the Menu button to open the Main menu
 Select Settings
The following settings are available.
Refresh mode
Here you can select if you want the screen to refresh after each
page (Full refresh) or after several pages. Full refresh after every
page is optimal for viewing, but will be a bit slower than
refreshing after several pages.
Select the desired option, then press the Enter button to confirm.
Power Settings
To enable/disable auto shutdown/ standby mode, also set the
time for the auto shutdown/standby mode.
Device Information
Displays product information about the device, such as
Firmware version, Internal/SD card memory status and so on.
Date & Time
To set the clock and date, time
Press the Directional-left/right buttons to move the cursor.
Press the Directional-up/down buttons to adjust the desired
value.
Select OK to confirm, select Cancel to cancel the setting.