Operation Manual

www.icarusreader.com
__________________________________________________________________________________________________________________
Copyright © 2011 ICARUS Reader. All rights reserved. 38 / 41
Start Setting
Customize your boot option; select opening recently read
documents or opening the main interface when booting the
device.
Screen Update
Set the refreshing rates, make full screen refreshing after
reading certain amount of pages, for example, every
3/5/7/9 pages, or always.
Power Management
In Power Management you can set the time of standby and
automatical shutdown for the device. If the time of
shutdown is set, the device won’t enter standby status
anymore; on the other hand, if the time of standby is set,
the device won’t shutdown automatically.
Format Flash
Select Format Flash to format the internal flash. Note,
after doing this operation all of the data in internal flash
will be removed.
Time Zone
Choose your local time zone.
Stylus Calibration
If the tip of your stylus does not match with the position
on the screen, you can improve the precision by stylus
calibration. Follow the guideline displayed on the screen:
‘Please press once at each of the marks showed on the
screen’. Total 5 points should be click one by one.
About
Displays the technical information of the device.