User manual

A PRODUCT OF THE ICP GROUP | WWW.ICPGROUP.EU PAGE 6
USER MANUAL
4.1 INSTALLATION REQUIREMENTS
• Always make sure you are using a clean, tidy and dry working surface.
• Unplug the ICARUS blue receiver before installation and assembly from a connected power source.
• Install the ICARUS blue receiver in sight of the user, if possible.
• DO NOT install the ICARUS blue receiver in the immediate vicinity of motors, relays or power cables.
• DO NOT install the ICARUS blue receiver on the inside of a metal casing (this limits the connection range).
• Always complete a supplied wiring diagram before use.
• Use suciently thick and proper insulated cables for the conditions where it is used in or for.
• Interconnect the wires with proper cable connectors, and DO NOT only use insulation-tape for this purpose. Improper
connections can cause fire and / or electric shock and lead to personal injuries and may damage the product.
• The ICARUS blue receiver has to be fixed with two screws / bolts (use M5 and length at will).
• Always comply with the applicable safety regulations.
• Install the ICARUS blue receiver with the connector facing down for max. water resistance!