User manual

A PRODUCT OF THE ICP GROUP | WWW.ICPGROUP.EU PAGE 2
USER MANUAL
SAFETY REGULATIONS
General
The user should have read this user manual before using the device for the first time and its content should have been
understood. If there are questions and / or uncertainties before the first use, you need to contact your supplier for
clarification.
This user manual must also be included when this device is used by any third party.
Therefore:
• Losses incurred as a result of not going through the safety-requirements is not covered under warranty. We accept
no liability for any consequential damages.
• We have no liability for property damage or personal injury caused by improper use or non-compliance with safety
regulations. In such cases, the warranty will expire.
• This product is not a toy and is NOT intended for use by children.
• DO NOT leave packaging material lying around. This can be hazardous material for children.
• DO NOT open and / or disassemble and / or alter the device. This will expire the warranty.
• DO NOT put the device under mechanical pressure.
• The user must always comply with the safety and operating instructions, also from all other devices and / or
applications associated with the product.
• When installing the device, make sure the cable is not crushed, kinked or damaged in any way, for instance by sharp
edges.
• Consult an expert if you are unsure about the proper use, safety or connection of the device.
Operating
• Only use the device after having read the user manual thoroughly and having complete understanding, without any
uncertainties, concerning the use and operation of the application where it is used in or for.
• DO NOT operate the device in an environment with lots of dust, flammable gases, vapours or solvents. This increases
the risk of fire and explosions.
• When using and operating the app, the user must have complete overview of the work area.
• DO NOT use the device if it is damaged. In this case, discard the product in an environmental friendly manner.
• Safe operation is not possible anymore when :
• The product has sustainable visible damage.
• The product is operating poorly or not functioning at all.
• Smoke, burning smell, discoloration of the product.
Power supply
• Only use the product within a range of 9 to 36 Volt dc.
Overload
• Make sure the product is neither mechanically nor electrically overloaded. This may damage the device and cause
fire or electric shock.