User manual

A PRODUCT OF THE ICP GROUP | WWW.ICPGROUP.EU PAGE 15
USER MANUAL
5.5.2 OUTPUT CONTROL (INTERLOCK)
Setting an interlock between two or more buttons will prevent
the outputs from being active at the same time.
Please proceed with 5.5.3
5.5.3 OUTPUT SELECTION AND BUTTON-VISIBILITY
The selected outputs are activated if button is pressed.
You have the choice to make the Button of the additional output visible or not.
Note: Timer or other settings can influece the output.
Please press „Next“ and then „Save“ to confirm all changes.