Operation Manual

iCarsoft i810
iCarsoft i810 iCarsoft i810
iCarsoft i810 OBDII/EOBD
OBDII/EOBDOBDII/EOBD
OBDII/EOBD scanner
scannerscanner
scanner
33
area network (CAN). For O
area network (CAN). For Oarea network (CAN). For O
area network (CAN). For O2 Monitor Test results
2 Monitor Test results 2 Monitor Test results
2 Monitor Test results
of CAN
of CANof CAN
of CAN-
--
-equipped vehicles, see chapter
equipped vehicles, see chapter equipped vehicles, see chapter
equipped vehicles, see chapter
“On
“On“On
“On-
--
-Board Mon. Test”.
Board Mon. Test”.Board Mon. Test”.
Board Mon. Test”.
Select [O2 Sensor Moni
[O2 Sensor Moni[O2 Sensor Moni
[O2 Sensor Monit
tt
toring test]
oring test]oring test]
oring test] in [Diagnostic Menu]
[Diagnostic Menu][Diagnostic Menu]
[Diagnostic Menu]
,
, ,
,
and press [
[[
[ ]
]]
].
. .
. The screen will display as shown below:
Press [ ][ ] to select, [ ] and [ ]
to Page, Press
[ ] to return and press [ ] to confirm.
Notes:
If the vehicle does not support the mode, an advisory
If the vehicle does not support the mode, an advisory If the vehicle does not support the mode, an advisory
If the vehicle does not support the mode, an advisory
message will be displayed on the screen.
message will be displayed on the screen.message will be displayed on the screen.
message will be displayed on the screen.
View test results of select O2 sensor
View test results of select O2 sensorView test results of select O2 sensor
View test results of select O2 sensor