Product Specs

57
3) Tap Continue once the code was accepted and the exchange is
complete.
Figure 5-31 Sample BMS Screen 8
5.8 DPF Service
The DPF function allows you to carry out numerous functions to the
Diesel Particulate Filter system. The tool will manage DPF
regeneration, DPF component replacement teach-in and DPF
teach-in after replacing the engine control unit.
The ECM monitors driving style and selects a suitable time to employ
regeneration. Cars driven primarily at idling speed and low load will
attempt to regenerate earlier than cars driven with higher loads and
at higher speed. For regeneration to occur, a prolonged high exhaust
temperature must be obtained.
In the event that the vehicle has been driven in such a way that
regeneration is not possible, a diagnostic trouble code will be
registered, DPF light and “Check Engine” indicator will display. A
service regeneration can be performed using this tool.
Before carrying out a forced DPF regeneration, check the following
items:
 The fuel light is not on.