Product Specs

44
4) Follow the on-screen instructions to pull the parking brake button
and wait for around 3 seconds until the parking brake is set.
When the operation is successfully completed, a “Completed
successfully” message will display on the screen. Press OK to
exit.
Parking Brake: Workshop Mode
This service is used to activate and deactivate the so-called
installation position for the Automatic Hold brake. In this mode, the
parking brake is moved into the opened position and temporarily
deactivated for personal protection.
The installation position must be activated for the following repairs:
 Replacement of brake pads.
 Replacement of a brake caliper.
 Replacement of an actuator.
Select Parking Brake: Workshop Mode and follow the on-screen
instructions to perform a series of operations to start the brake pad
after replacement.
When the operation is successfully completed, a “Completed
successfully” message will appear on the screen. Press OK to exit.
5.4 Electronic Throttle Control
Electronic Throttle Control system (ETC), relearns the throttle value
control value while clear or replace the throttle value.
 To perform Throttle functions
1. Tap the Service application button from the CR MAX Job Menu.
2. Tap Throttle icon and wait for the vehicle manufacturer screen.
You can tap VIN Scan or the vehicle manufacturer to acquire
vehicle VIN information and tap Yes to confirm. See Vehicle
Identification on page 14 for detail.