Product Specs

27
parameter name to make item selection. Tap the check
box again to de-select the item.
b) Drop-down Button – tap the drop-down button on the
right side of the parameter name to open a sub menu
that provides various choices for data display mode.
 Value Column – displays the values of the parameter items.
 Unit Column – displays the unit for the parameters.
 To change the unit mode, return to the “Settings” button
and select the desired mode.
Display Mode
There are four types of display modes available for data viewing,
allowing you to view various types of parameters in the most
suitable way.
Tapping the drop-down button on the right side of the parameter
name to open a sub menu. There are four buttons to configure
the data display mode, and a Help button for access to
additional information.
Each parameter item displays the selected mode independently.
1) Analog Gauge Mode – displays the parameters in form of
an analog meter graph.
2) Text Mode – this is the default mode that displays the
parameters in texts and displays in list format.
NOTE
Reading of status parameters, such as a switch reading, which are
mostly in word form, such as ON, OFF, ACTIVE, and ABORT, can
only be displayed in Text Mode. Whereas reading of value
parameters, such as a sensor reading, can be displayed in text mode
and other graph modes.
3) Waveform Graph Mode – displays the parameters in
waveform graphs.