User's Manual

1 Using this Manual

This manual contains device usage instructions.

Some illustrations shown in this manual may contain modules and optional equipment that are

not included in your system.

1.1 Conventions

The following conventions are used.

1.1.1 Illustrations

Illustrations used in this manual are samples, the actual testing screen may vary for each

vehicle being tested. Observe the menu titles and on-screen instructions to make correct

option selection.

1.1.2 Operation

Welcome to using the scan tool of iCarsoft, you should do something before using the

scan tool.

 At first, please check production list such as scan tool and accessories already when you

open the package, read the user’s manual and connect the OBDII cable to scan tool.

 Don’t open the scan tool in a rainy environment or in the absence of training. Don’t soak

the scan tool as the keypad and port are not waterproof, also no solvents such as alcohol

are allowed to clean the keypad or display.

 Make sure the ignition is ON when you connected the scan tool already.

WARNING

For vehicles manufactured by different vendors, it is possible that it has different diagnostic

menus. For details, please follow the instructions on the screen to proceed. Some functions

need to be used under the guidance of professional technicians.

2 General Introduction

When it comes to ultra-portability, CR MAX BT is your perfect companion. Installed with a

fast quad-core processor, CR MAX BT offers maximum convenience and swift diagnosis. The

intuitive user screen makes using the device effortless through a 7-inch LCD touchscreen that

displays at 1024 x 600 quality. Together with the ability to quickly read and clear DTCs for all

available modules of the majority of the makes and models on the market, CR MAX BT

provides you with superior special functions, including OIL (Oil Reset Service), EPB

(Electronic Parking Brake), SAS (Steering Angle Sensor), BMS (Battery Management System),

DPF (Diesel Particulate Filter), BLD(ABS Bleeding), ETC (Electronic Throttle Control) and

INJ(Injector Coding).