User's Manual

45
provide information feedback.
1. Select the check box behind the log, you can select multiple logs at the same time, tap
the delete button in the upper right corner to delete.
2. Select the check box behind the log, you can select multiple logs at the same time, tap
the feedback button in the upper right corner. The interface for information
feedback will appear.
3. Enter the title, description, vehicle information, etc. in the input box, "*" is required.
Then tap the Upload button to submit feedback. You can also tap the “
○
+ ” button
to add up to 3 photos to submit together.
13 Uninstall
This section allows you to manage the software applications installed on the CR MAX BT
Diagnostics System. Select this section to open a management screen, on which you can
check all the available vehicle diagnostic applications.
By clicking on each line of car brand to select the car software to be removed, the
selected item displays a red check in the check box on the right. Tap the Delete button on the
top bar to remove the software from the system database.
14 Remote Desk
The Remote Desk application launches the TeamViewer Quick Support program, a
simple, fast and secure remote control screen. Use this application to receive ad-hoc remote
support from iCarsoft’s support technicians by allowing them to control your CR MAX BT tablet
on their PC via the TeamViewer software.
Make sure the tablet is connected to the Internet before launching the Remote Desk
application.
 To receive remote support from a partner
1. Power on the tablet. Tap the Remote Desk application on the CR MAX BT Job
Menu. The TeamViewer screen displays and the device ID is generated and
shown.
2. Your partner must install the Remote Control software to his/her computer by
downloading the TeamViewer full version program online
(http://www.teamviewer.com ), and then start the software on his/her computer at
the same time, in order to provide support and take control of the Display Tablet
remotely.
3. Provide your ID to the partner, and wait for him/her to send you a remote control
request.
4. A popup will display to ask for your confirmation to allow remote control on your
device.
5. Tap Allow to accept, or tap Deny to reject.
Refer to the associated TeamViewer documents for additional information.