User's Manual

23
Figure 4-8 Sample View Data Screen
1. Main Section
 Name Column – displays the parameter names.
a) Check Box – tap the check box on the left side of the parameter name to
make item selection. Tap the check box again to de-select the item.
b) Drop-down Button – tap the drop-down button on the right side of the
parameter name to open a sub menu that provides various choices for data
display mode.
 Value Column – displays the values of the parameter items.
 Unit Column – displays the unit for the parameters.
To change the unit mode, return to the “Settings” button and select the desired
mode.
Display Mode
There are four types of display modes available for data viewing, allowing you to view
various types of parameters in the most suitable way.
Tapping the drop-down button on the right side of the parameter name to open a sub
menu. There are four buttons to configure the data display mode, and a Help button for
access to additional information.
Each parameter item displays the selected mode independently.
1) Analog Gauge Mode – displays the parameters in form of an analog meter graph.
2) Text Mode – this is the default mode that displays the parameters in texts and
displays in list format.
NOTE