User's Manual

including unit type, version numbers and other specifications. Also you can save these data by

press save button. The sample Module Information screen displays as below:

 Read Fault Codes

This function retrieves and displays the DTCs from the vehicle’s control system. The

Read Codes screen varies for each vehicle being tested. On some vehicles, freeze frame data

can also be retrieved for viewing. The sample Read Codes screen displays as below:

Functional Button

 Save – tap this icon to save the information related to the fault code

 Back – tap it to return to the previous screen or exit the function.

 – tap this icon to view the information of the detail.

 – tap this icon to view the information of the freeze frame.

 Clear Fault Codes

After reading the retrieved codes from the vehicle and certain repairs have been carried

out, you can erase the codes from the vehicle using this function. Before performing this

function, make sure the vehicle’s ignition key is in the ON (RUN) position with the engine off.

 To erase codes

1) Select the [Clear fault code] on the "function menu"

2) At this time, a warning message will appear on the screen, indicating that the fault

code and frozen data information will be cleared.

a) Select [OK] to continue. After the operation is successful, an complete

information will be displayed on the screen.

b) Select [Cancel] to exit.

3) Re-enter the [Read fault code] function to retrieve the fault code to ensure the

successful code clearing operation.

 View Data

When this function is selected, the screen displays the data list for the selected module.

The items available for any control module vary from one vehicle to another. The parameters

display in the order that they are transmitted by the ECM, so expect variation between

vehicles.

Select any module manually, and you will enter the specific data flow list. Gesture

scrolling allows you to quickly move through the data list. Simply swipe the screen up or down

to locate the data you want. The figure below shows a typical Live Data screen: