User's Manual

18
Figure 4-5 Sample Diagnosis mode Screen
The diagnostic screens typically include four sections.
1. Status Information Bar
2. Main Section
Status Information Bar
The Status Information Bar at the top of the Main Section displays the following items:
1) Back button – Returns to the CR MAX BT Job Menu.
2) Menu Title – displays the menu heading of the Main Section.
3) Voltage Icon – displays the vehicle’s voltage status.
Main Section
The main section displays the diagnostic mode of the vehicle, depending on the vehicle
type; or it may vary depending on the operation stage, displaying vehicle identification
selection, main menu, test data, messages, instructions and other diagnostic information.
4.3.2 Screen Messages
Screen messages appear when additional input is needed before proceeding. There are
three main types of on-screen messages: Confirmation, Warning, and Error.
Confirmation Messages
This type of messages usually displays as an “Information” screen that informs you when
you are about to perform an action that cannot be reversed or when an action has been
initiated and your confirmation is needed to continue.
When a user-response is not required to continue, the message displays briefly.
Warning Messages