User's Manual

8
Figure 2-8 VCI Device binding screen 4
5. If you need to unbind, tap the unbind button in the lower right corner, and the device
will be unbound, and you can re-bind with other VCI devices.
6. If the binding is successful, the VCI binding option on the setting page will display
the serial number of the bound VCI device.
7. In any other interface, if you need to communicate with the vehicle without VCI
binding, the tablet will give a message indicating that you need to bind the VCI, and
it will automatically jump to the binding interface after confirmation. Then follow the
instructions on the screen.
2.2.5 VCI Device connection
The tablet computer can communicate with VCI via Bluetooth or USB cable. Generally,
the USB cable is faster. When the VCI is successfully bound with the tablet, it can
automatically transfer vehicle data to your tablet when it enters the vehicle diagnostic system.
At this time, the indicator light on the right side of the VCI device flashes blue and green
alternately.
The working range of Bluetooth communication is about 32.8 feet (about 10 meters); once
the device enters the transmission range of the VCI connector, the signal lost due to the out of
range will be automatically restored.
2.3 Accessory Kit
2.3.1 VCI Adapter
When connected to a vehicle that complies with OBDII/EOBD, the VCI device can be
directly connected to the data link connector (DLC) of the vehicle, or the VCI device can be