User's Manual

5
Figure 2-4 VCI view
1. Vehicle data connector (16-pin)-connects VCI directly to the vehicle's 16-pin diagnostic
interface (DLC).
2. Mini USB Port - The CR MAX BT can be connected to the VCI through a USB cable.
3. Power indicator: red - When the VCI is connected to a power source, connected to a
vehicle, or bound to a device, this indicator light is always bright red.
4. Status indicator: Blue and green flashing alternately - When communicating with the
vehicle, this indicator light is flashing green and blue.
5. Flashlight switch, press down the flashlight to turn on, release the flashlight to turn off.
2.2.2 Power Sources
The VCI device can receive power from both of the following sources:
1. Vehicle Power
2. External power supply
Vehicle Power
The VCI device operates on 12-volt vehicle power, which it receives through the vehicle
data connection port. The device powers on whenever it is connected to an OBD compliant
data link connector (DLC).
External power supply
VCI devices can be powered on external sockets by using the equipped USB External
Power Adapter and Mini USB Cable.
2.2.3 Technical Specifications
Item
Description