Users Manual Part 2

CR Legend User Manual

automobile starting motor sweeps the bore, resulting in the increase of

self-friction of starting motor.

The charge test mainly detects and analyzes the vehicle charging system,

including generator, rectifier, rectifier diode, etc. Through this test, we can know

that the output voltage of the generator, the rectifier diode, and the charging

current is normal or not respectively.

1. Connect one end of the included diagnostic cable to the DB15 diagnostic

connector, a

nd the other end to the vehicle’s DLC port.

2. Plug one end of the battery cable clamps into the circular connector of the

tool. C

lamp the BLACK and RED clips of the battery cable clamps on the

Negative (-) and Positive (-) terminals of the vehicle battery respectively.

Note: The cable connector is keyed and will only fit one way. If you have problems

connecting the cable connector to the circular connector, rotate it 180

and try again.

3. Tap Battery -> In-car inspection on the tool.

4. Follow the on-screen prompts to fill in the vehicle information and tap Next to

continue until the battery test is complete.