Users Manual Part 2

CR Legend User Manual
26
6.14 Sunroof Initialization
This function enables you to set the sunroof lock off, closed when it rains, sliding
/ tilting sunroof memory function, temperature threshold outside the car etc.
6.15 Suspension Calibration
This function enables you to adjust the height of the body.
It needs to be performed in the following cases:
1. When replacing the body height sensor, or control module in the air suspension
system.
2. When the vehicle height is incorrect.
6.16 EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it
is cleaned or replaced.
6.17 Windows Calibration
This feature is designed to perform door window matching to recover ECU initial
memory, and recover the automatic ascending and descending function of
power window.
6.18 Seats Calibration
This function is applied to match the seats with memory function that are
replaced and repaired.
6.19 Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
6.20 Language Change
This function is used to change the system language of the vehicle central
control panel.
6.21 A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
6.22 Coolant Bleed
Use this function to activate the electronic water pump before venting the cooling
system.
6.23 Transport Mode
In order to reduce power consumption, the following functions may be disabled,
including limiting the vehicle speed, not waking up the door opening network,
and disabling the remote control key, etc. At this time, the transport mode needs
to be deactivated to restore the vehicle to normal.