Users Manual Part 1

CR Legend User Manual
2
1.2 Components & Controls
1.
POWER key - Press it to turn the tool on/off.
2.
LCD screen – Indicates the test results.
3.
Printer – Prints the diagnostic reports or screenshots.
4.
USB Type A port – Connects the Videoscope or USB storage device.
5.
USB Type C port – Connects the power adaptor for charging.
6.
DB15 diagnostic connector – Connects the diagnostic cable to the vehicle’s
DLC (Data Link Connector) port.
7.
Circular connector – Connects the battery tester clamps to perform battery
detection.
8.
Rear camera
9.
Handgrip belt
10.
TMPS antenna
11.
Camera flash
1.3 Technical Parameters
Operating system: Android 10