Users Manual Part 1

CR IMMO User Manual

3 Initial Use

3.1 Charging

Follow the steps below to charge the tablet:

1. Connect one end of the charging cable to the USB socket of the power

adapter.

2. Connect the other end to the charging port on the bottom of the host.

3. Plug the charger power plug into a power outlet to start charging.

Caution: Please use the included power adaptor to charge your tool. No

responsibility can be assumed for any damage or loss caused as a result of using

power adaptors other than the one supplied.

Note: If the battery remains unused for a long time or the battery is completely

discharged, it is normal that the tool will not power on while being charged. Please

charge it for 5 minutes and then turn it on.

3.2 Power On & Off

Long press the POWER button and then the start interface will appear.

Long press the POWER button until the dialog box pops up, and tap Shutdown to

turn it off or tap Restart to reboot it.

3.3 Basic Operations

Single-tap: To select an item or launch a program.

Double-tap: To zoom in so that the text on a webpage appears in a

column that fits your device’s screen.

Long press: Tap and hold on the desired vehicle software to delete

it.

Slide: To jump to different pages.

Swipe from the right edge of the screen: Back to the previous

screen or exits.

3.4 Change System Language

The tool supports multiple system languages. To change the language of the tool,

please do the following:

1. In the Job Menu, tap Settings -> System -> Language & input -> Languages.

2. Tap Add a language, and then choose the desired language from the list.

3. Tap and hold the desired language and drag it to the top of the screen and then

release it, the system will be changed into the target language.