Users Manual Part 1

CR IMMO User Manual

D. BENCH mode cable

E. Adaptor cable for the BENCH mode cable

G. Gearbox ECU

4. Tap Connect to read the chip ID of the original car gearbox.

5. Tap Backup EEPROM Data to read the EEPROM data of the original car

gearbox and then enter the new file name to save it on the tablet.

6. Tap Backup FLASH Data to back up the FLASH data of the original

vehicle gearbox and then enter the new file name to save it on the

tablet.

7. Tap Disconnect to disconnect the original vehicle gearbox, and then

disconnect the original vehicle gearbox from the BENCH mode cable.

8. Connect the new gearbox ECU to the IM2000 PRO according to the steps 3

and 4.

9. Tap Restore EEPROM Data, select the EEPROM data backed up in step 5,

and tap OK to write the EEPROM data of the original vehicle gearbox in the

new gearbox ECU.