Users Manual Part 1

CR IMMO User Manual

D. BENCH mode cable

E. Adaptor cable associated with the BENCH mode cable

F. Engine

b. Tap Backup EEPROM data to create a file name and save it on the tablet.

c. Tap Restore EEPROM data to write the backup EEPROM data into the

new engine.

Stop: The EEPROM restoration applies only when you have encountered

irrevocable faults or after a new engine is replaced.

d. Tap Backup FLASH data to save the FLASH data on the tablet to avoid

accidents.

e. Tap Read chip ID to read the chip information.

5.2.3

Gearbox Programming

This function allows you to restore the old gearbox data or write in new data

after a new gearbox is replaced.

Below procedures show you how to perform gearbox programming for AUDI.

There are two kinds of gearbox ECU replacements, and the user can choose

the corresponding solution according to the actual situation.

Situation 1 - The data of the original vehicle gearbox ECU is readable. Data is

not damaged, and the gearbox can be cloned. In this case, we just need to

back up the original gearbox EEPROM and FLASH, and then restore them into

the gearbox ECU for replacement.

Situation 2 - The data of the original vehicle gearbox ECU is unreadable or the

data is damaged. In this case, we need to back up the EEPROM of the ECU for