Manual

71
z Alarm set: Click alarm set button, the interface is shown as below. See Figure 5-31.
(This interface is just like the abnormity setup). Please refer to chapter 5.5.2 for
detailed information.
z HDD operation: You can select HDD mode from the dropdown list such as read-only
or you can erase all data in the HDD. Please note system needs to reboot to get all
the modification activated.
Figure 5-30
Please highlight icon to select the corresponding function.
Figure 5-31
For the HDD group setup operation, please note:
z Each channel’s records can be stored into the specified HDD Group.
z Each HDD Group is corresponding to several hard disks, while one hard disk is
only included in one HDD Group.
z Each channel is only corresponding with one HDD Group, while one HDD Group
can store records from several channels.