Manual

53
Figure 5-1
5.3 Setting
In main menu, highlight setting icon and double click mouse. System setting interface is
shown as below. See Figure 5-2.
Figure 5-2
5.3.1 General
General setting includes the following items. See X357H357H357HFigure 5-3X.
z System time: Here is for you to set system time
z Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or
DD-MM-YYYY.
z Date separator: There are three denotations to separate date: dot, beeline and
solidus.
z DST: Here you can set DST time and date. Please enable DST function and then click
set button. You can see an interface is shown as in Figure 5-4. Here you can set start
time and end time by setting corresponding week setup. In Figure 5-4, enable date
button, you can see an interface is shown as in Figure 5-5. Here you can set start time
and end time by setting corresponding date setup.
z Time format: There are two types: 24-hour mode or 12-hour mode.