Manual

50
4.9.3 Patrol setup (Tour Setup)
In Figure 4-38, click patrol button. The interface is shown as in Figure 4-42.Input preset
number and add this preset to a patrol (tour). For each patrol (tour), you can input max 80
presets.
Figure 4-42
4.9.4 Activate Patrol (tour)
In X341H341H341H Figure 4-39, input patrol (tour) number in the No. blank and click patrol button
4.9.5 Pattern Setup
In Figure 4-39, click pattern button and then click “begin” button. The interface is shown as
in Figure 4-43. Then you can go to Figure 4-36 X to modify zoom, focus, and iris.
Go back to Figure 4-43 and click “end” button. You can memorize all these operations as
pattern 1.
Figure 4-43
4.9.6 Activate Pattern Function
In X346H346H346H Figure 4-39, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In X347H347H347H Figure 4-38, click border button. The interface is shown as in X348H348H348H Figure 4-43.
Please go to
X349H349H349H X349H349H349HFigure 4-35, use direction arrows to select camera left limit
Then please go to
X350H350H350H Figure 4-43X and click left limit button
Repeat the above procedures to set right limit.