Manual

113
Parameter Function
column.
Please note if you want to reboot the device please make
sure you have proper reboot right and there is no login user
in current device.
Email
The email interface is shown as in
X463H463H463HFigure 7-33X.
Figure 7-33
Please refer to the following sheet for detailed information.
Parameter Function
SMTP Server Input server address and then enable this function.
Port Input port value here.
User Name The sender email account user name.
Password The sender email account password.
Sender Sender email address.
Subject Input email subject here. Max 32-digit.
Address Input receiver email address here. Max input three addresses.
Support SSL encryption mailbox.
Health mail
enable
Please check the box here to enable this function.
This function allows the system to send out the test email to
check the connection is OK or not.
Health mail
interval
Please check the above box to enable this function and then
set the corresponding interval.
System can send out the email regularly as you set here.