Manual

100
click stop record button. Now you have set one pattern.
7.2.2.6 Preset
In X441H441H441HFigure 7-12X, move the camera to your desired location and then input preset value.
Click add button, you have set one preset.
7.2.2.7 Auto tour
In X442H442H442HFigure 7-12X, input auto tour value and preset value. Click add button, you have added
one preset in the tour.
Repeat the above procedures you can add more presets in one tour.
7.2.2.8 Assistant
You can select the assistant item from the dropdown list. See X443H443H443HFigure 7-13X.
7.2.2.9 Matrix
This series product supports matrix extension function. You can control the video input
and output switch
7.2.2.10 Light and wiper
If your PTZ protocol supports the light and wiper control function. You can enable/disable
the light or the wiper.
Figure 7-13
7.2.3 Color
Click color button in section 3, the interface is shown as X444H444H444HFigure 7-14X.
Here you can select one channel and then adjust its brightness, contrast, hue and
saturation. (Current channel border becomes green).
Or you can click default button to use system default setup.