User guide

50
z Parity: there are three options: odd/even/none. Default setup is none.
Figure 4-41
After completing all the setting please click save button. Right click mouse (click “Fn” Button
in the front panel or click “Fn” key in the remote control). The interface is shown as in Figure
4-42.
Figure 4-42
Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 4-43.
Here you can set the following items:
z Step: value ranges fro 1 to 8.
z Zoom
z Focus
z Iris
Please click icon
and to adjust zoom, focus and iris.