Owner manual

140
Parameter Function
Export
Configuration
Export system configuration to local PC.
Import
Configuration
Import configuration from PC to the system.
7.5.3 Advanced
7.5.3.1 HDD Management
HDD management includes net storage management and local storage management.
Please note, if you want to use local storage function, your storage device need to support
current function.
Please select the storage device first and then you can see the items on your right become valid.
You can check the corresponding item here. See Figure 7-52.
Figure 7-52
Please refer to the following sheet for detailed information.
Parameter Function
Format Clear data in the disk.
Read/write Set current disk as read/write
Read only Set current disk as read.
Redundant Set current disk as redundant disk.
Recover Recover dada after error occurs.
Use as
snapshot
Set current disk as snapshot disk.
Please note system needs to reboot to activate current setup.
7.5.3.2 Alarm I/O