User Manual

3.4 HDD Installation

This series combo DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.

You can refer to the Appendix for recommended HDD brand. You can select the capacity as your

requirement.

Please follow the instructions below to install the HDD.

1. Insert the key to the hole

and then press. Turn the

clockwise 90 degrees to open

the lock.

2. Loose the two screws of the

HDD cover.

3. Remove the HDD cover from the

rear panel.

4. Connect the HDD cable and

power cable.

5. Place the HDD cover to the

HDD in accordance with the four

holes.

6. Use the screws to fix the

HDD on the cover.