Manual

46
In X352H352H352HFigure 4-38, click page switch button(Or Fn button), you can see an interface is shown as
below. See
X353H353H353HFigure 4-43. Here you can set auxiliary function. The aux value has relation ship with
the Aux button of the decoder.
Click page switch button again, system goes back to
X354H354H354HFigure 4-34.
Figure 4-43
Please note the direction buttons are to control the speed dome menu. The button definition is
defined by the speed dome protocol. The button becomes grey and invalid if current protocol
does not support this function.
The up/down button is to switch between the items and the left/right button is to modify the setup.