Manual

42
Figure 4-33
Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 4-34.
Here you can set the following items:
z Step: value ranges fro 1 to 8.
z Zoom
z Focus
z Iris
Please click icon
and to adjust zoom, focus and iris.
Figure 4-34
In X325H325H325HFigure 4-34, please click direction arrows (See X326H326H326HFigure 4-35) to adjust PTZ position. There are
total 8 direction arrows. Please note system only supports up/down/left/right four directions if you
use the front panel to control the direction.
Figure 4-35
4.8.3 3D Intelligent Positioning Key
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure
4-36. Please make sure your protocol supports this function and you need to use mouse to
control.