IR Network Intelligent Speed Dome User’s Manual Version 1.0.
Table of Contents 1 FEATURES AND FUNCTIONS ..........................................................................................1 1.1 General Introduction...................................................................................................................................................1 1.2 Features .......................................................................................................................................................................1 1.2.
.2 4 Login and Logout ........................................................................................................................................................6 MENU .................................................................................................................................9 4.1 Screen Menu Index ..................................................................................................................................................9 4.
Welcome Thank you for purchasing our product! This user’s manual is designed to be a reference tool for the operation of your system. Here you can find information about this speed dome features and functions, as well as a detailed menu tree.
Important Safeguards and Warnings 1．Electrical safety z z z All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. We are not liable for any problems caused by unauthorized modification or attempted repair. 2．Transportation Security z z No heavy stress, violent vibration or water splash are allowed during transportation, storage and installation.
. About Accessories Always use all the accessories recommended by manufacturer. Before installation, please open the package and check that all the components are included in the package: Contact you local retailer ASAP if something is missing in your package.
1 Features and Functions 1.1 General Introduction This series IR network intelligent speed dome product is an integrated high intelligent speed dome. It adopts new configuration design and is easy for the project construction. This is a digital and intelligent product of vivid video. The installation is convenient. Comparing with the previous series product, this series IR network intelligent speed dome has added some new features.
1.2.9 Defog Customized defog setup in case the fog environment may affect the video quality. It is to enhance video resolution. 1.2.10 3D noise reduction Support 3D noise reduction setup to reduce the camera noise under the low illumination environment. It is to enhance video quality. 1.2.11 Action on Alarm This series IR high definition speed dome has 7 alarm inputs (normal open or normal close) and 2 alarm outputs (normal open).
2 Quick Configuration Tool 2.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 2.2 Operation Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 2-1. In the device list interface, you can view device IP address, port number, subnet mask, default gateway, MAC address and etc.
Figure 2-2 Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 2-3. Figure 2-3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set. In the configuration tool search interface (Figure 2-1), please select a device IP address and then double click it to open the login interface.
Figure 2-4 After you logged in, the configuration tool main interface is shown as below. See Figure 2-5. Figure 2-5 For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.
3 Web Operation This series speed dome product supports the Web access and management via PC. Web includes several modules: live view, PTZ, setup, alarm, logout and etc. Speed dome factory default setup: z IP address: 192.168.1.108. z User name: admin z Password: admin 3.1 Network Connection Please follow the steps listed below for network connection. z Make sure the speed dome has connected to the network properly. z Speed dome IP address and PC IP address shall be in the same network segment.
Figure 3-2 After installation, the interface is shown as below. See Figure 3-3. Please input your user name and password. Default factory name is admin and password is admin. Select the network connection type. Note: For security reasons, please modify your password after you first login. Figure 3-3 After you logged in, you can see the main window. See Figure 3-4.
Figure 3-4 Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.
4 Menu 4.1 Screen Menu Index Note: ERR means current setup is invalid; you need to restores speed dome factory default setup. Slight difference may be found due to different series.
Note: z ERR means current setup is invalid. z Please make sure all the cable connections are right. 4.2 Self-diagnosis System Information ADDR BAUD RATE PARITY SOFTWARE BACK ：001-S ：9600 ：NONE ：V1.02.0.R EXIT After installation, please connect speed dome to power. The system goes on a self-diagnosis, and then it pops up the above interface to show the system information. The above interface disappears after speed dome received the first command (or the display time lasts for 20 seconds.
In the speed dome main menu, you can use the left/right button on the keyboard or in the speed dome terminal menu to configure the system menu. Before setup, please move the cursor to the current item you want to configure. z In main menu, please click confirm button to go to the sub menu or use left/right key to configure setup. z Use up/down button to select back option and then click confirm button to go back to the previous menu.
Move the cursor to SITE INFORMATION and then click confirm button. z ADDR TYPE: System supports software address only. z ADDR-SOFT: It is to display speed dome software address. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. The value ranges from 1 to 255. z BACK: Go back to the previous menu. z EXIT: Log out system menu. 4.4.2 Display Setting Before the operation, please make sure you purchased camera supports zoom function.
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu. z WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button, you can go to the third menu. z EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you can go to the third menu. z DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm button, you can go to the third menu. There are three options: auto/manual/off.
4.4.3.2 Exposure Setting AE MODE GAIN SETTING SHUTTER IRIS SETTING EXPOSURE COMP SLOW AE SLOW SHUTTER NEXT PAGE BACK z z z z z z z z ： AUTO ： 02 ：1/50 ：11 ： 08 ： 01 ：ON EXIT AGC GAIN LIMIT HIGH GAIN SLOW SHUTTER LIMIT NOISE REDUCTION 3D NOISE REDUCTION BLC HIGH LIGHT REDUCE WDR SETTING AE RECOVERY BACK ：03 ：ON ：1/25 ：03 ：OFF ：OFF ：15M EXIT AE MODE: Here you can set the camera exposure mode. It includes: auto/manual/AV (iris priority)/TV (shutter priority).
HIGH LIGHT REDUCE: It is to reduce the abruptly strong video on the video in case it affects the video quality. Please click the left/right button to set. o EXPOSURE RESTRAIN: It is to restrain the abrupt high light on the video in case it affects the video quality. Please click the left/right button to set. o WDR SETTING: It is an abbreviation for wide dynamic region. Please make sure your camera supports current function.
z SHADOW CORRECTION: It is to set video shadow correction level. Please use the left/right button on the z z keyboard or in the speed dome terminal menu to set. BACK: Go back to previous menu. EXIT: Log out system menu. 4.4.3.5 Day/Night Setting Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the submenu. DAY/NIGHT DAY TIME NIGHT TIME THRESHOD SAVE BACK z z z z z z z ：AUTO ：07H 00M ：19H 00M ：4 EXIT DAY/NIGHT: It is to set camera day/night switch mode.
z z BACK: Go back to previous menu. EXIT: Log out system menu. 4.4.3.7 Image Adjust Move the cursor to IMAGE ADJUST and then click confirm button to go to the submenu to set. HUE SATURATION CHROMA SUPPRESS GAMMA CONTRAST BACK z z z z z z z ： ： ： ： EXIT HUE: It is to set picture hue. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. SATURATION: It is to set picture saturation.
DIGITAL ZOOM :：OFF ：X3 ：OFF ：OFF DZOOM LIMIT PICTURE FLIP FREEZE FUNC ：OFF STABLE CAMERA FACTORY DEFAULT CAMERA RESTATRT BACK z z z z z z z z z EXIT DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function. DZOOM LIMIT: Here you can set the threshold of the digital zoom. PICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z z BACK: Go back to previous menu. EXIT: Log out system menu. 4.4.4.1 Preset Setup PRESET NO ：001 TITLE ：PRESET001 SETTING CALL BACK EXIT Move the cursor to PRESET button and then click confirm button to go to set interface. z PRESET NO: Please use left/right key to modify preset number. The different protocols support different preset values. z TITLE：Title text is the label used for you to identify the camera. System will automatically name a title for the camera.
z EXIT: Log out system menu. 4.4.4.3 Scan AUTO SCAN NO ： 001 SET LEFT LIMIT SET RIGHT LIMIT SCAN SPEED ：160 CALL STOP BACK EXIT Move the cursor to SCAN button and then click confirm button. z AUTO SCAN NO：Here is to set auto scan number. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z SET LEFT LIMIT：Here is to set camera left address. Click confirm button to save current setup. z SET RIGHT LIMIT：Here is to set camera right address.
When you move the cursor to one tour number, please click confirm button to set the tour. Please use up/down button to set preset number, dwell time and speed. Use the left/right button to go to the next tour. Click confirm button you can exit the setup. After you completed the setup, move the cursor to back button to go to the previous interface. z DELETE TOUR：Here is to delete a tour. Input tour number in TOUR NO and then move the cursor to DELETE TOUR, click confirm button to delete.
IDLE FUNC ：OFF IDLE TIME ：010MIN IDLE ACTION ：PRESET PARAMETER ：NONE SAVE BACK EXIT When there is no available command for specified time, dome automatically goes on the previous set functions. • IDLE FUNCTION ：There are two modes ON/OFF. Please use left/right key to set. • • • IDLE TIME: System idle period. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. IDLE ACTION：There are several functions you can select: NONE/PRESET/SCAN/TOURING/PATTERN.
• WEEK: Here you can set the week information. Please use the left/right button to set. You can set for one day, or you can set for the whole week. • START TIME: Here you can set the task begin time. Move the cursor to current item and then click confirm button to set the time. Please use the up/down button to set the detailed value and then use left/right button to go to the next setup item.
• PRIVACY MASK: Here you can set the privacy mask number and etc. It includes the third menu. Please move the cursor to the current item and then click the confirm button to go to the next interface. • • PTZ SPEED: It is to set PTZ speed. Please use the left/right button to set. SET ZERO: It is to set the PTZ initial position. Please move the PTZ to the corresponding position and then click the confirm button to complete the setup. • POWER UP: It is to set the PTZ action when the speed dome boots up.
z z z z RESIZE：It is to adjust the privacy zone size. Move the cursor to current item and use the left/right button on the keyboard or in the speed dome terminal menu to set .Please continue pressing direction button to widen or narrow zone size. ← is to narrow the horizontal width and → is to widen the horizontal width. ↑ is to widen vertical height and ↓ is to narrow the vertical height. SAVE：Here is to save user setup. BACK: Go back to previous menu. EXIT: Log out system menu.
z z z z z HEATER CONTROL: It is to set temperature control mode. It includes three modes: auto/normal open/normal close. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. OPEN TEMPERATUREP: This function is on when the heater control mode is auto. It is for you to set temperature to enable the heater. CLOSE TEMPERATURE: This function is on when the heater control mode is auto. It is for you to set temperature to disable the heater.
5 Cable Connection 5.1 Combination Cable Connection The speed dome combination cable includes network cable, audio/video cable connection port, RS485 connection port, alarm input and output port. Please refer to the label for detailed information. z z z Please note the IE6 does not support alarm upload function. Please use IE7 or higher version.
5.2.1 System Connection Please refer to Figure 5-1 for system connection information. AC220V Input Transfor mer Network Output Power Output PC DVR Figure 5-1 5.2.2 Alarm Connection Please refer to Figure 5-2 for alarm connection information.
6 FAQ 6.1 Daily Maintenance Please clean dome cover regularly to get vivid image. Handle the cover with care. Use water to wash. Don’t use cloth to clean. Note: The sweat from your hand may erode plating surface, your nail may scrape dome cover resulting in blur image. 6.2 Problems and Solutions SYMPTOM 1) No self-diagnosis, no video signal when I connect dome to power. 2) No self diagnosis. There is a noise 3)Video signal is not successive 4) Video is not clear.
7 Appendix Ⅰ Thunder Proof and Surge Protection This series speed dome adopts TVS lighting protection technology. It can effectively prevent damages from various pulse signals below 1500W, such as sudden lighting and surge. While maintaining your local electrical safety code, you still need to take necessary precaution measures when installing the speed dome in the outdoor environment.
8 Appendix 2 Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Pb Hg Cd Cr VI PBB PBDE Sheet Metal ○ ○ ○ ○ ○ ○ Plastic Parts ○ ○ ○ ○ ○ ○ PCB ○ ○ ○ ○ ○ ○ Housing ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Bearing ○ ○ ○ ○ ○ Connection Cable ○ ○ ○ ○ ○ ○ Motor (If possible) ○ ○ ○ ○ ○ ○ Power (If possible) ○ ○ ○ ○ ○ ○ Bracket (If possible) ○ ○ ○ ○ ○ ○ Accessories ○ ○ ○ ○ ○ ○ Camera Driver ○ Note O: Indi
Note • This manual is for reference only. Slight difference may be found in the user interface. • All the designs and software here are subject to change without prior written notice. • All trademarks and registered trademarks are the properties of their respective owners. • If there is any uncertainty or controversy, please refer to the final explanation of us. • Please visit our website or contact your local service engineer for more information.
