Owner manual

Figure 5-12

5.2.2.4 Auto Scan

In X439H439H 439HFigure 5-12X, move the camera to you desired location and then click left limit button.

Then move the camera again and then click right limit button to set a right limit.

5.2.2.5 Pattern

In X440H440H 440HFigure 5-12, you can input pattern value and then click start record button to begin PTZ

movement. Please go back to Figure 5-11 to implement camera operation. Then you can click

stop record button. Now you have set one pattern.

5.2.2.6 Preset

In X441H441H 441HFigure 5-12X, move the camera to your desired location and then input preset value. Click add

button, you have set one preset.

5.2.2.7 Auto tour

In X442H442H 442HFigure 5-12, input auto tour value and preset value. Click add button, you have added one

preset in the tour.

Repeat the above procedures you can add more presets in one tour.

5.2.2.8 Assistant

You can select the assistant item from the dropdown list. See Figure 5-13.

5.2.2.9 Matrix

This series product supports matrix extension function. You can control the video input and

output switch

5.2.2.10 Light and wiper

If your PTZ protocol supports the light and wiper control function. You can enable/disable the

light or the wiper.