User manual

14
SOFTWARE INSTALLATION
After the camera’s admin utility is launched, all cameras found on your
local area network will be displayed with basic information. To connect
to a certain camera using your Web browser, double-click the camera
listed.
ThisinitialscreenalsointroducestheLanguagedrop-downmenu(above
thecamera-listeld)andthethreeiconsatthebottom(fromlefttoright):
SearchCamera;BrowseCameraviaWeb;andCongureCamera.
Search Camera—Clicktosearch(andrefreshthesearch)forall
cameras on the local area network.
Browse Camera via Web — Select a camera on the list, then click to
connect to the camera using your Web browser.
Congure Camera—Clicktocongureacamera’snetworkandsecurity
settings. When the Login screen
 displays,llinthe“Password”eld
 (thedefaultpasswordis“1234”)
and click “OK” to display the LAN
 SettingandSecurityscreens(both
 shownbelow).NOTE: The default
username, “admin,” cannot be
changed here.