Datasheet

preliminary preliminary
iC-MZ
DIFFERENTIAL HALL SWITCH
Rev A1, Page 3/11
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no Operating Conditions.
Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected
interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system
development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer
suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with
respect to actual interferences.
Item Symbol Parameter Conditions Unit
No. Min. Max.
G001 VB Supply Voltage -0.4 40 V
G002 V() Voltage at D, ND, NERR -0.4 40 V
G003 V() Voltage at A, NA, TEST -0.4 6 V
G004 I(VB) Current in VB -100 100 mA
G005 I() Current in D, ND -600 600 mA
G006 I(NERR) Current in NERR -10 30 mA
G007 I() Current in A, NA, TEST -4 4 mA
G008 Vd() Susceptibility to ESD at all pins HBM 100 pF discharged through 1.5 kΩ 1 kV
G009 Tj Operating Junction Temperature -40 150 °C
G010 Ts Storage Temperature Range -40 150 °C
THERMAL DATA
Operating Conditions: VB = 4.5..36V, unless otherwise stated
Item Symbol Parameter Conditions Unit
No. Min. Typ. Max.
T01 Ta Operating Ambient Temperature Range -40 +125 °C
T02 Rtjc Thermal Resistance Chip/Case 10 K/W
T03 Rthja Thermal Resistance Chip/Ambient Mounted on PCB, with thermal pad of 2 cm
2
40 K/W
All voltages are referenced to ground unless otherwise stated.
All currents into the device pins are positive; all currents out of the device pins are negative.