Datasheet

iC-MA
8-BIT ANGULAR HALL SENSOR / ENCODER
Rev C1, Page 5/19
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter Conditions Unit
No. Min. Max.
G001 VDD Supply Voltage -0.3 6 V
G002 V() Voltages at A, B, C, D, NEN, CFG1,
CFG2
V() < VDD + 0.3 V -0.3 6 V
G003 Imx(VDD) Current at VDD -30 30 mA
G004 Imx(GND) Current at GND -30 30 mA
G005 Imx() Current at A, B, C, D, NEN, CFG1,
CFG2
-10 10 mA
G006 Ilu() Pulse Current (Latch-up Immunity) pulse width < 10 µs -100 100 mA
G007 Vd() ESD-Voltage at all pins HBM 100 pF discharged over 1.5kΩ 2 kV
G008 Ts Storage Temperature -40 150 °C
THERMAL DATA
Operating conditions: VDD = 5V ±10 %
Item Symbol Parameter Conditions Unit
No. Min. Typ. Max.
T01 Ta Ambient Temperature -40 125 °C
T02 Rthja Thermal Resistance Chip/Ambient DFN10 on multi-layer test board acc. JEDEC
standard
200 K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.