Tus neeg siv phau ntawv

7
7. Applicable Regulations
Manufacture pursuant to the following safety regulations:
EN 61010-1 (Safety requirements for electronic measurement and
control equipments and equipments for use in laboratories; Part 1:
General Requirements)
UL 3101-1 (electronic equipments for use in laboratories; Part 1:
General Requirements)
CAN/CSA C22.2(1010-1)
EN 61010-2-10 (Heating)
Manufacture pursuant to the following EMC regulatios:
EN 61326-1 (Electromagnetic Compatibility)
EU associated guidelines:
EMC guideline: 2004/108/CE
Equipment guideline: 73/023/EWG
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
8. Specifications
Items
Specifications
S01 series
Voltage [VAC]
100-240
Frequency [Hz]
50/60
Max. power input of motor [W]
5
Max. power output of motor [W]
3
Speed range [rpm]
15-1500
Max. Stirring quantity [H
2
O, L]
0.8
Max. load capacity [Kg]
2.0
Material
ABS
Dimensions of workplate (mm)
90 x 90
Dimensions (mm)
175×120×15
Weight [kg]
0.3
Permitted ambient temperature [°C]
5 - 40
Permitted relative humidity
80%
Protection class acc. to DIN 60529
IP65
Table 3