Use Manual

1
2
3
5
6
4
7
1 2
3
4
5
Instruction
Language Switch:
Earphone shutdown state, long press the key for
8 seconds, until the "Di Di"tone, then language
switch is successful. (After switching language,
please pair manually when first time usage)
Product
1: MFB
2: LED
3: Microphone
4: Ear sets
5. Indicator light of charger base
6
: Charger thimble
7: Micro USB charger port
Earphone accessories:
Charger base earphone(a pair) Ear sets( 2
pair Large, 2 pair Middle) Cable Instruction
book
Power On/Off
When you open the charger base and take out the
earbuds, earbuds will auto power on.
When you put the earbuds in and close charger
base, earbuds will auto power off.
Bluetooth automatic pairing
Open the charger base, the earbuds will auto
power on.
The earbuds red light on, and then take out the
earbuds, they will automatically pair in 3-5
seconds. (The host device will flash red and
blue light alternatively, while the other earbud
will flash blue light)
Take out
the earbuds Host
Red and blue
light flashing
alternatively
Auxiliary
Blue light
flashing
Turn on Bluetooth of the phone, search
for "64", then pair.
Turn on Bluetooth of the phone, search
for "64", then pair.
64 64
Q64 Q64
Manual bluetooth pairing
(If the earphones bluetooth automatic pairing is not
successful, you can use manual bluetooth pairing)
When the pair earbuds is power off, long press
MFB 3 seconds until the red and blue light flash
alternatively.
When two earbuds in red and blue light flashes
status, double click any earbud MFB, earbuds
connected, double-click the earbud as host
device, the indicator light of host device is
still red and blue light flashing alternatively.
Red and blue
light flashing
alternatively
Red and blue
light flashing
alternatively
Host
Wearing
Choose the ear sets suitable for yourself.
Note: Middle size ear sets are suit for most of
people. It's recommend that you try to start from
the middle size ear sets
Music Play
You can use any one of earbud to control when
you play music in your music player
MFB
( Pause/Play/Last song/Next song)
Press one times to pause music playing, press
again can resume music playing.
Press three times in a row to play next song .
Press four times in a row to play last song .
Phone Calls
Answer call only host device earbud working
MFB
(Answer/Reject/Redial last number)
When calls come in, short press answer call .
When calls come in, long press the botton 3
seconds to reject call.
When standby mode, double click the botton .
Using the earbud individually
Any one of earbud, long press 3 seconds when
the earphone power off, then red and blue light
Turn on Bluetooth of the phone, search for "64",
then paired.
Charging
Charge the charger base through the cable, when
the battery is full, the indicator light turns off
automatically
Put earbuds into the charger base, then charging
automatically, full charge light off
Earphone charging Red light flashing
E
arphones full charge Light off
Charging base charging Continuous white light
Charger base full charge Light off
Model: E64
Bluetooth version: 5.0
Single earphone weight: 4.5g
Earphone size: φ16.8*23mm
Earphone battery capacity: 3.7V/2*55mAh
Earphone charge time: About 1 hour
Music playing time: 4-5 hours
Profle support:HFP/A2DP/AVRCP
Frequency: 2.4 02 GHz~2.48 GHz
Transmission distance: 10M
Power input: DC 5V/500mA
Charger base charge to earphone: 2 times Charger base
Charger base weight: 36g
Specification
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE：This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement, it
can be used in portable exposure condition without restriction.
6