Installation Guide

[phone] [e-mail] www.goibright.com
Frequently*Asked*Questions*
Device network distribution method (resetting method):
1. The device automatically enters the quick flash status after it is powered on for the
first time. If the device has an indicator light, the light flashes; if the device has no
indicator lights, such as bulbs, it flashes itself. If the device does not flash quickly,
you are advised to log in the app and click " " in the top right corner, select the
corresponding device type, and click to enter "Add Device" page. The notice of
"How to Set the Indicator Light to Quick Flash" is above the "Confirm Indicator Is
Flashing Fast" button, you may click to see the details;
2. If the product has an On-Off button but no Reset button, such as a socket, please
press and hold the button for 5 seconds until the indicator light flashes quickly;
3. If the device has no switches, such as a light, please connect it to a light socket and
operate the switch "On/Off" for 3 times, keep it on until the light flashes quickly;
4. If the product has a Reset button, generally you can just press the Reset button
until the indicator light flashes quickly.
(Note: Pairing supports 2.4G network. 5G network is temporarily unavailable.)
Please see the device manual for details.
In the compatible mode, please reset the device after the quick flash until the
indicator light flashes slowly.
Is there an option in the app to connect to WIFI?
First: Register your account
Open App into the register/login interface. You can register by email or mobile
number. Input the phone number or email address for getting verification
code to register.
Second: Add your device
1. Power on your device.
2. Log into the App and select the + icon on the top right of the App to add device,
select the correct device.
There are two config modes: EZ Mode and AP Mode
1. EZ Mode
Ensure the indicator light flashing quickly (twice a second) which indicates
that the device is in config mode which allows you to connect.
3