Product guide

IBM Flex System x440 Compute Node 9

Processor options

The x440 supports the processor options listed in the following table. The server supports one or two or

four processors (three processors is not supported). For a given processor model (for example, the Xeon

E5-4603), there are two part numbers: the first one is for the rear two processors (CPUs 1 and 2) and

include taller heat sinks; the second part number is for the front two processors (CPUs 3 and 4) and

include shorter heat sinks.

The table also shows which server models have each processor standard. If no corresponding

where used

model for a particular processor is listed, then this processor is available only through Configure to Order

(CTO).

Table 3. Processor options

Part

number

Feature code* Intel Xeon processor description CPUs

1 & 2

CPUs

3 & 4

Models

where used

90Y9060 A2C0 / A2C2 Xeon E5-4603 4C 2.0GHz 10MB 1066MHz 95W Yes No A2x and A4x

88Y6263 A2C1 Xeon E5-4603 4C 2.0GHz 10MB 1066MHz 95W No Yes -

90Y9062 A2C3 / A2C5 Xeon E5-4607 6C 2.2GHz 12MB 1066MHz 95W Yes No B2x and B4x

69Y3100 A2C4 Xeon E5-4607 6C 2.2GHz 12MB 1066MHz 95W No Yes -

90Y9064 A2C6 / A2C8 Xeon E5-4610 6C 2.4GHz 15MB 1333MHz 95W Yes No C2x and C4x

69Y3106 A2C7 Xeon E5-4610 6C 2.4GHz 15MB 1333MHz 95W No Yes -

90Y9066 A2C9 / A2CB Xeon E5-4617 6C 2.9GHz 15MB 1600MHz 130W Yes No -

90Y9049 A2CA Xeon E5-4617 6C 2.9GHz 15MB 1600MHz 130W No Yes -

90Y9070 A2CC / A2CH Xeon E5-4620 8C 2.2GHz 16MB 1333MHz 95W Yes No D2x and D4x

69Y3112 A2CG Xeon E5-4620 8C 2.2GHz 16MB 1333MHz 95W No Yes -

90Y9068 A2CF / A2CE Xeon E5-4640 8C 2.4GHz 20MB 1600MHz 95W Yes No -

90Y9055 A2CD Xeon E5-4640 8C 2.4GHz 20MB 1600MHz 95W No Yes -

90Y9072 A2CJ / A2CL Xeon E5-4650 8C 2.7GHz 20MB 1600MHz 130W Yes No F2x and F4x

69Y3118 A2CK Xeon E5-4650 8C 2.7GHz 20MB 1600MHz 130W No Yes -

90Y9186 A2QU / A2QW Xeon E5-4650L 8C 2.6GHz 20MB 1600MHz 115W Yes No -

90Y9185 A2QV Xeon E5-4650L 8C 2.6GHz 20MB 1600MHz 115W No Yes -

* When two feature codes are specified, the first feature code is for CPU 1 and the second feature code is for CPU