Operation Manual

9. Remove all adapters and adapter insulators (see “Removing a PCI or PCI-X
adapter” on page 36), making sure to place the adapters on a static-protective
surface.
AC
AC
1234
10. Remove the external SCSI cable assembly, located at the I/O port panel at the
rear of the server, by pushing up on the latch clip (1) with a flat-bladed
screwdriver to release the assembly, and then lifting it out of the server.
11. Remove the adapter retainer bracket assembly (see “Adapter retainer bracket
assembly” on page 77).
12. Remove the power supply structure (see “Power-supply structure” on page 78).
13. Reach behind the server and turn the two blue captive thumbscrews to release
the I/O board from the chassis.
82 IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide