Operation Manual

Power supply connector
Connect one end of the power-supply power cord to this connector and connect the
other end to an ac power source. The server comes with one hot-swap power
supply. You can add a second hot-swap power supply to obtain full power
redundancy. Connect each power supply to separate ac power circuits for power
redundancy.
SCSI connector
Use the external small computer system interface (SCSI) connector to connect an
external SCSI device to channel B of the Ultra 320 SCSI controller in the server.
The following illustration shows a 68-pin external SCSI connector.
34
1
68
35
Chapter 4. Installing options 65