Operation Manual

Hot-swap fan 1
Hot-swap fan 5
Hot-swap fan 6
Hot-swap fan 3
Hot-swap fan 4
Fan Error
LED
Hot-swap fan 2
5. Remove all fans (see “Replacing a hot-swap fan” on page 55).
Microprocessor-tray
levers
Microprocessor-tray
release latch
6. Remove the microprocessor tray:
a. Lift the microprocessor-tray release latch (1).
b. Open the microprocessor-tray levers (2)).
Attention: The microprocessor tray is heavy. Pull the tray part-way out of
the server, reposition your hands to grasp the body of the tray, and then
pull the tray out the rest of the way.
Chapter 4. Installing options 47