Operation Manual

Note: See Chapter 7, “Parts listing, Types 8861, 8862,” on page 139 to determine which components are
replaceable by the customer and which components must be replaced by an IBM field service technician.
Error code/symptom FRU/action
166-201-114 (ISMP indicates I2C errors on
RXE bus PCI_B slot 2)
v See Hardware Maintenance Manual for IBM RXE-100 Remote
Expansion Enclosure.
166-201-115 (ISMP indicates I2C errors on
RXE bus PCI_B slot 3)
v See Hardware Maintenance Manual for IBM RXE-100 Remote
Expansion Enclosure.
166-201-116 (ISMP indicates I2C errors on
RXE bus PCI_B slot 4)
v See Hardware Maintenance Manual for IBM RXE-100 Remote
Expansion Enclosure.
166-201-117 (ISMP indicates I2C errors on
RXE bus PCI_B slot 5)
v See Hardware Maintenance Manual for IBM RXE-100 Remote
Expansion Enclosure.
166-201-118 (ISMP indicates I2C errors on
RXE bus PCI_B slot 6)
v See Hardware Maintenance Manual for IBM RXE-100 Remote
Expansion Enclosure.
166-260-000 (ASM restart failure)
1. Disconnect all server and option power cords from server, wait
30 seconds, reconnect, and retry.
2. Remote Supervisor Adapter.
166-342-000 (System Management BIST
indicates failed tests)
1. Disconnect all server and option power cords from server, wait
30 seconds, reconnect, and retry.
2. Remote Supervisor Adapter.
166-400-000 (ISMP Self Test Result failed
tests: xxx) where xxx=flash, ROM, or RAM
1. Disconnect all server and option power cords from server, wait
30 seconds, reconnect, and retry.
2. (Re)flash ISMP with latest firmware level.
3. I/O board.
166-400-100 (DMC Self Test Result failed
tests: xxx) where xxx=flash, ROM, or RAM
1. Disconnect all server and option power cords from server, wait
30 seconds, reconnect, and retry.
2. (Re)flash ISMP on RXE with latest firmware level.
3. RXE backplane.
180-197-000 (SCSI ASPI driver not
installed)
1. Remove RAID adapter, if installed, and rerun test.
2. SCSI backplane.
3. I/O board.
4. Microprocessor tray assembly.
180-361-003 (Failed Fan LED test)
1. Fan
2. I/O board
180-xxx-000 (Diagnostics LED failure)
v Run diagnostic LED test for failing LED.
180-xxx-001 (Failed Front LED Panel test)
1. Operator information panel cable
2. Operator information panel
3. I/O board
4. Microprocessor tray assembly
180-xxx-002 (Failed Diagnostics LED
Panel test)
1. Operator information panel cable
2. Operator information panel
3. I/O board
4. Microprocessor tray assembly
100 IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide